BISON DIY SPRAY ADHESIVE 200 ml

Contact spray adhesive based on SBR rubber intended for bonding large surfaces of a wide range of materials.

Easy to apply, quick to use. The glue is resistant to temperatures from -40°C to +50°C.

SCOPE OF USE: Strong, fast and firm surface bonding. It glues e.g. paper, cardboard, wood, textile, leather, metal, felt, foamed polystyrene (Styrofoam) and other foam materials, numerous plastics with the same and other materials.

INSTRUCTIONS FOR USE: Shake the contents of the container well before use, spray the glue from a distance of about 15-25 cm. Contact bonding: Spray the surfaces to be bonded on both sides and let dry for 10 minutes. Then put the two parts together and press firmly for a short time. Gluing with correction: For glued surfaces where at least one is porous (absorbent). The glue can only be applied to one glued surface and the two materials can be joined immediately. Correction is possible for 5 minutes. Drying time approx. 24 hours. Repeatable removable bonding: Spray the adhesive on one surface and let it dry for 20 minutes. A (self-adhesive/permanent adhesive) layer is formed and repeated sticking and peeling of the material is possible. After use, turn the container upside down and spray the remaining adhesive from the spray nozzle (until only propellant gas comes out of the spray valve).

Safety notice

Signal word: DANGER Content of hazardous substances: Gasoline (petroleum), hydrodesulfurized, light, dearomatized; Gasoline (petroleum), hydrogenated light; n-hexane H222 - Extremely flammable gas. H229 - Container under pressure: may burst when heated. H315 - Irritating to skin. H336 - May cause drowsiness or dizziness. H411 ​​- Toxic to aquatic organisms, with long-term effects. P101 - If medical attention is needed, have product container or label at hand. P102 - Keep out of the reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P211 - Do not spray on open flames or other sources of ignition. P251 - Do not puncture or burn even after use. P261 - Avoid breathing vapour. P410+P412 - Protect from sunlight. Do not expose to temperature exceeding 50°C/122°F. P501 - Dispose of contents/container according to national regulations.