BISON ENAMEL FIX 20 ml - cold enamel

A special white repair agent (cold enamel) for repairs and damage to the enamel of bathtubs, sinks, showers, washing machines, refrigerators, etc. brushes is part of the package, it is placed in the cap inside the bottle.

BISON Enamel Fix resists hot water (up to + 80°C), cleaning agents, diluted alkalis and temperatures from -20°C to + 80°C.

SCOPE OF USE: Repairs of damaged enamels of small objects. INSTRUCTIONS FOR USE: Repaired surfaces must be clean, dry, degreased and free of rust. Apply the product with a brush to the repaired area and let it dry for 24 hours, if necessary it can be repeated again. Repair larger and deeper damage at least three times. This will improve the quality and aesthetics of the repaired area. Do not use at temperatures below 10°C. TIP: BISON Enamel Fix can be tinted with toning color pastes as needed - ATTENTION, based on synthetics. For simpler and smaller repairs, it is possible to tint with finely grated colored chalks.

Safety notice

Signal word: WARNING Content of dangerous substances: n-butyl acetate H226 - Flammable liquid and vapour. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. P101 - If medical attention is needed, have product container or label at hand. P102 - Keep out of the reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P261 - Avoid breathing vapour. P280 - Wear protective gloves/goggles/face shield. P303+P361+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing. P501 - Dispose of contents/container according to national regulations. EUH066 - Repeated exposure may cause skin dryness or cracking.