BISON EPOXY 5 MIN 24 ml

• Crystal clear.
• Open processing time 5 minutes.
• Final strength 100 kg/cm2.
• Resists water, moisture, oils, solvents, diluted acids and alkalis.
• Heat resistance from -40°C to +100°C.
• Handling strength after 20 minutes depending on temperature.
• Curing after 24 hours.
• Fills joints and cracks
• After hardening, it can be painted over.

SCOPE OF USE: Ideal for quick, firm and invisible repairs of mugs, porcelain, ceramics, glass, leather, wood, chipboard, stone, concrete, metals, thermosets, hard PVC, polystyrene foam, laminates, some plastics (umakart, polyester, bakelite) etc. both among themselves and each other. Thanks to its filling ability, it is ideal for filling cracks. Not suitable for gluing PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The working temperature is +5° to +35°C. The glued parts must be clean, dry and degreased. Remove the red cap between the pistons. Break off the tip of the nozzles. Squeeze out a sufficient amount and mix well until you get a uniform color. Open processing time is 5 minutes. Apply the glue on one side, for rough and porous materials on both sides, press both surfaces together and fix them (using clamps or tape). Clean the ends properly and close (the cap must be broken from the pistons of the double syringe). Store in a dry and cool place. TECHNICAL PROPERTIES: Moisture resistance: good Temperature resistance: from -40°C to +100°C Chemical resistance: good Filling capacity: good

Safety notice

Signal word: WARNING Content of hazardous substances: epoxy resin from Bisphenol A and epichlorohydrin average molecular weight ≤700; 2,4,6-tris(dimethylaminomethyl)phenol H315 - Irritating to skin. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H411 ​​- Toxic to aquatic organisms, with long-term effects. P101 - If medical attention is needed, have product container or label at hand. P102 - Keep out of the reach of children. P261 - Avoid breathing vapour. P280 - Wear protective gloves/goggles/face shield. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing. P501 - Dispose of contents/container according to national regulations. EUH205 - Contains epoxy components. May cause an allergic reaction. P302+P352 - IF ON SKIN: Wash with plenty of soap and water.