BISON EPOXY METAL 24 ml

• High ultimate strength of 180 kg/cm2.
• Highly resistant to extreme conditions (high loads, high forces, vibrations, (sea) water, chemicals)
• Metallic coloring.
• Open processing time 45 minutes.
• Final strength 180 kg/cm2.
• Resists (sea) water, oils, solvents, dilute acids and alkalis.
• Heat resistance from -60°C to +100°C.
• Handling strength after 10 hours.
• Curing after 24 hours.
• Fills joints and cracks
• After hardening, it can be sanded, painted, drilled

SCOPE OF USE: It is especially suitable for metal objects that require resistance to extreme conditions - for example chemicals, vibrations or sea water. Also suitable for gluing wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, marble, rubber, polystyrene foam, some plastics (umakart, polyester, bakelite), etc., both to each other, as well as each other. Not suitable for gluing PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The working temperature is +5°C to +35°C. The glued parts must be clean, dry and degreased. Remove the silver cap between the pistons. Break off the tip of the nozzles. Squeeze out a sufficient amount and mix well until you get a uniform color. Open processing time is 45 minutes. Apply the glue on one side, for rough and porous materials on both sides, press both surfaces together and fix them (using clamps or tape). Clean the ends properly and close (the cap must be broken from the pistons of the double syringe). Store in a dry and cool place. TECHNICAL PROPERTIES: Moisture resistance: good Temperature resistance: from -60°C to +100°C Chemical resistance: very good Recoatability: good Filling capacity: good TIP: Use BISON EPOXY 5 MIN for transparent and very fast bonding.

Safety notice

Signal word: DANGER Content of hazardous substances: Epoxy resin from Bisphenol F; epoxy resin from Bisphenol A and epichlorohydrin average molecular weight ≤700; oxirane, mono[(C12-14-alkyloxy)methyl] derivatives; 2,4,6-tris(dimethylaminomethyl)phenol; amines, polyethylene poly-, triethylenetetramine fraction H315 - Irritating to skin. H411 ​​- Toxic to aquatic organisms, with long-term effects. P102 - Keep out of the reach of children. P101 - If medical attention is needed, have product container or label at hand. P280 - Wear protective gloves/goggles/face shield. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing. P501 - Dispose of contents/container according to national regulations. EUH205 - Contains epoxy components. May cause an allergic reaction. H317 - May cause an allergic skin reaction. H318 - Causes serious eye damage. P310 - Immediately call a POISON CENTER/doctor.