BISON EPOXY REPAIR 56 g

It is a very high-quality, very strong and hard two-component adhesive epoxy putty of the new generation.

It is specially designed for extreme and permanent repairs.

The adhesive sealant has no deformation, does not rust and is resistant to chemical media and temperatures from -20°C to +120°C. It can be machined, drilled, milled and sanded and painted after curing. Glues, seals and fills cracks and holes in concrete, wood, metals and plastics. SCOPE OF USE: Suitable for metals (e.g. steel, cast iron, aluminium), wood, laminate, ceramics, porcelain, concrete, stone, marble and many plastics. It is not suitable for gluing PP, PE, Teflon and rubber. INSTRUCTIONS FOR USE: The glued parts must be clean and degreased. Cut off the required amount of material and remove the protective film. Work the mass so that it has the same color. Firmly work the material into the repaired area. The workability of plasticine is 3-4 minutes, depending on the temperature. It reaches handling strength after 7-10 minutes. Machining, drilling, milling, grinding and painting can be done after 60 minutes. It reaches functional strength after 24 hours at room temperature. The minimum working temperature is +15°C. Store in a dry and cool place. TIP: Use BISON EPOXY REPAIR AQUA to bond and seal materials exposed to moisture or placed directly under water.

Safety notice

Signal word: WARNING Content of hazardous substances: epoxy resin from Bisphenol A and epichlorohydrin average molecular weight ≤700 H317 - May cause an allergic skin reaction. H315 - Irritating to skin. H411 ​​- Toxic to aquatic organisms, with long-term effects. H319 - Causes serious eye irritation. P101 - If medical attention is needed, have product container or label at hand. P102 - Keep out of the reach of children. P261 - Avoid breathing vapour. P280 - Wear protective gloves/goggles/face shield. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing. P501 - Dispose of contents/container according to national regulations. EUH205 - Contains epoxy components. May cause an allergic reaction.