BISON EPOXY UNIVERSAL 24 ml

• High ultimate strength of 170 kg/cm2.
• Open processing time 90 minutes.
• Resists water, moisture, oils, solvents, diluted acids and alkalis.
• Heat resistance from -50°C to +80°C.
• Handling strength after 7 hours.
• Curing after 24 hours.
• Fills joints and cracks
• After hardening, it can be painted over.

SCOPE OF USE: It is suitable for bonding metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, marble, rubber, polystyrene foam, some plastics (umakart, polyester, bakelite), etc., both between themselves and each other. Not suitable for gluing PP, PE, Teflon and silicone. INSTRUCTIONS FOR USE: The working temperature is +5° to +35°C. The glued parts must be clean, dry and degreased. Remove the cap from the double syringe. Extrude filler and hardener in a volume ratio of 1:1 (two equal strips) and mix properly. The workability of the adhesive is 90 minutes at room temperature. Apply the glue on one side, for rough and porous materials on both sides, press both surfaces together and fix them (using clamps or tape). Clean the ends properly and close (the cap must be broken from the pistons of the double syringe). Store in a dry and cool place. TECHNICAL PROPERTIES: Moisture resistance: good Temperature resistance: from -50°C to +80°C Chemical resistance: good Filling capacity: good

Safety notice

Signal word: WARNING Content of hazardous substances: epoxy resin from Bisphenol A and epichlorohydrin average molecular weight ≤700; formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol; Fatty acids, c18-unsaturated, dimers, polymers with an oil component; Tetraethylpentamine H315 - Irritating to skin. H318 - Causes serious eye damage. H319 - Causes serious eye irritation. H411 ​​- Toxic to aquatic organisms, with long-term effects. P102 - Keep out of the reach of children. P101 - If medical attention is needed, have product container or label at hand. P280 - Wear protective gloves/goggles/face shield. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing. P501 - Dispose of contents/container according to national regulations. EUH205 - Contains epoxy components. May cause an allergic reaction. P310 - Immediately call a POISON CENTER/doctor.