BISON PLASTIC 25 ml

Transparent, waterproof, strong adhesive for bonding hard plastics.

The joint is formed by so-called cold welding. Temperature-resistant adhesive that can withstand temperatures up to +100°C.

SCOPE OF USE: Bonds modern household synthetic materials: ABS (telephones, mobile phones, computers, power tools, hair dryers, etc.), rigid PVC (pipes, pipes, gutters, etc.), polycarbonate - Lexan® (heat-resistant plastics, stoves, etc.) , acrylic glass - Perspex®, Plexiglas® (rear/front lights of cars). Not suitable for PE, PP and Teflon. INSTRUCTIONS FOR USE: Apply an appropriate amount of glue to one surface (the amount of glue is not directly proportional to the quality of the glued joint), press together and fix for a few seconds or until it hardens completely. A larger amount of glue may increase the curing time. TIP: Use BISON VINYL PLASTIC for gluing softened plastics. NOTICE: Use at temperatures above +5°C. Remove unwanted drops immediately with acetone. Store in a dry and cool place. The minimum shelf life is 24 months.

Safety notice

Signal word: DANGER Content of hazardous substances: ethyl acetate; butanone; acetone H225 - Highly flammable liquid and vapour. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. P101 - If medical attention is needed, have product container or label at hand. P102 - Keep out of the reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. P261 - Avoid breathing vapour. P370+P378 - In case of fire: Use Water fog, Alcohol-resistant foam, Extinguishing powder, Carbon dioxide to extinguish.. P403+P233 - Store in a well-ventilated place. Keep the package tightly closed. P501 - Dispose of contents/container according to national regulations.