BISON VINYL PLASTIC 25 ml with patch

Adhesive intended primarily for repairing products made of softened PVC.

It allows gluing and repairing even directly under water.

It consists of a contact polyurethane adhesive and a transparent film made of softened PVC for easy repairs. Withstands temperatures from -15°C to +70°C. SCOPE OF USE: Adhesive suitable for gluing: Soft PVC/Vinyl: inflatable boats, beds, swimming pools, PVC raincoats, tent fabric, film, bathroom curtains, etc. Artificial leather/Skai®: seat upholstery (in cars, on chairs, sofas), roofing, vinyl (plastic) shoes, belts, etc. INSTRUCTIONS FOR USE: Degrease, clean and dry the glued surface. Adjust the enclosed foil into a round shape, 1-2 cm larger than the hole/crack. Apply a thin layer of glue to both surfaces, let dry for about 5-10 minutes and press firmly together for a few seconds. Inflatable items: Wait at least 6 hours (at +20°C) before inflating the item again. Bonding and repairs under water: prepare a patch of the correct size - preferably larger. Apply glue to the patch. Immediately submerge in water and apply to the damaged area (e.g. torn pool film). Leave for at least 12 hours without straining. DONE! TIP: For hard plastics, use BISON PLASTIC - welding glue for bonding hard plastics - cold welding. NOTICE: Do not use at temperatures below +10°C. Not suitable for polyethylene (PE) films. Remove unwanted drops immediately with acetone. Store in a dry and cool place. The minimum shelf life is 24 months.

Safety notice

Signal word: DANGER Content of dangerous substances: acetone; ethyl acetate