Drying hanging bag Silikagel Signus OB-10/120 g

Desiccant bags and capsules filled with silica gel absorb moisture.

Thanks to this, they prevent mould, corrosion or other negative processes caused by moisture.

We use it for stored materials that are sensitive to moisture and can change properties or parameters due to moisture. It can be regenerated and reused without significant loss of parameters. Regeneration at a temperature of approx. 120 °C. When dried, the silica gel becomes transparent. Drying time in the oven is a maximum of 10 minutes. If the contents of the bag are not completely dried, repeat the process after cooling. Warning: Do not use a microwave oven for drying. Most common uses: electronic devices, pharmaceutical products, food packaging, medical devices, industrial packaging, flower drying, textile products. And wherever it is necessary to keep the packaging dry, at low relative humidity. Dimensions: 11 x 16 cm

Technical description

Technical parameters of transparent silica gel in OB-10 bags: Bulk weight: approx. 620 - 700 g/l Adsorption capacity (water content in % based on own weight) at 23(+2)°C: 20% relative humidity = approx. 11.0 % 50% relative humidity = approx. 25.5% 90% relative humidity = approx. 36.0% Losses during annealing (at 950°C): approx. 6.7% Active surface: approx. 800 m2/g PH: 4 - 6 Average of pores: 2.0-3.0 nm Pore volume: 0.35-0.45ml/g Thermal conductivity: 0.63KJ/m.hour Dimensions: 11 x 16 cm