Epoxy clear resin EN 100
Epoxy clear resin EN 100
This epoxy resin is one of the highest quality lamination systems, thanks to the use of the highest quality raw materials on the market. The set is primarily intended for painting, but it can also be used for casting up to a thickness of 4 mm/30 g. Instructions on the product packaging. More
Product code: P00043 Shipping and Payment
14,18 € excl. VAT (17,16 € incl. VAT)
This epoxy resin is one of the highest quality lamination systems, thanks to the use of the highest quality raw materials on the market. The set is primarily intended for painting, but it can also be used for casting up to a thickness of 4 mm/30 g. Instructions on the product packaging. More
Product code: P00043 Shipping and Payment
Epoxy resin with the hardener contains a resin weighing 500 g (+ 150 g hardener) or 1000 g (+300 g hardener). The epoxy system and hardener has been developed based on your requirements, UV stable. The system shows great clearness and minimal shrinkage. It is very friendly to the environment and your health, because almost no harmful fumes were measured during curing, it does not cause an allergic skin reaction during normal use.
The new hardener significantly suppresses oxidation and subsequent yellowing of the laminate. This new system is one of the highest quality lamination systems, thanks to the use of the highest quality raw materials. Thanks to its properties, the set is primarily intended for painting, but it can also be used for casting up to a thickness of 4 mm/30 g.
Photoluminescent pigment P350 can also be added to the resin, in an optimal ratio of 150 g per 1000 g of resin. After lighting, the cured resin glows for up to 12 hours. You can find the pigment HERE. Many interesting decorations can be created from clear epoxy resin, video HERE.
Technical description
Mixing ratio: 100 g resin and 30 g hardener. The usability after mixing the hardener is about 50 minutes before the resin begins to solidify. Mix the mixture carefully. Resin application is possible with a brush or roller. Instructions on the product packaging.
Weight 650g contains:
- resin - 500 g
- hardener - 150 g
weight 1300g contains:
- resin - 1000 g
- hardener - 300 g
Download
Related products6
BISON GRIZZLY MONTAGE EXTREME 440g, mounting adhesive with immediate fixation
7,96 € incl. VAT
Holders for escape route marking
from 4,36 € incl. VAT
Double-sided adhesive nano tape - transparent, Signus HP38, 3 m
from 3,56 € incl. VAT
Alternative products5
Epoxy coating with photoluminescent pigment EN 100
27,91 € incl. VAT
Epoxy resin crystal clear for casting EZ 350
31,96 € incl. VAT
Epoxy resin with photoluminescent pigment for casting EZ 350
42,73 € incl. VAT
Epoxy resin Veropal ClearCast 300, for casting layers up to 5 cm
from 27,16 € incl. VAT
Epoxy resin Veropal UV Plus 100, for casting layers up to 10 cm
from 46,75 € incl. VAT