Gloves DOCKER type

DOCKER gloves, palm made from split cow leather. Back made from cotton canvas. Cow split leather Cotton back with leather reinforcement Reinforced cotton cuff Gloves: Cow leather, thickness 0.7 mm to 0.9 mm. Back and inside cotton fabric: minimum 150 g / m2. Cotton fabric: minimum 220 g / m2. Manual: Mechanical hazard gloves for general use in dry environments without the risk of chemical, microbiological, electrical or thermal hazards. Use limitation: Do not use gloves beyond their use as defined in the instructions for use. The user is reminded that the gloves have very high tensile strength (level 3) and must not be used if there is a risk of being caught by the machine in motion. These gloves do not contain substances that are cancerous or toxic. Sensitive persons may have allergic reaction, when contact with gloves (natural latex, cuffs on some gloves at the edge). In that case discontinue use of gloves and consult with a doctor. Before using these gloves, check for damage. Replace them if necessary. Storage Instructions: Store the gloves in a cool, dry, frost-free, and light-protected place in their original packaging. Cleaning and maintenance instructions: No special maintenance is recommended for this type of glove. Technical parameters: The product complies with the requirements of European Directive 89/686, in particular with regard to cutting, harmless and comfort and also the requirements of these standards: DIRECTIVE 89/686 / EEC PPE EN420: 2003 General requirements and test methods 5: grip ability (1 to 5) EN388: 2003 Protective gloves against mechanical risks (palm protection) 3: Abrasion resistance (1 to 4) 1: Blade cutting resistance (1 to 5) 2: Tear resistance (1 to 4) 2: Puncture resistance (1 to 4)
Technical description
DOCKER gloves, palm made from split cow leather. Back made from cotton canvas. Split cow leather Cotton back with leather reinforcement Reinforced cotton cuff Gloves: Cow leather, thickness 0.7 mm to 0.9 mm. Back and inside cotton fabric: minimum 150 g / m2. Cotton fabric: minimum 220 g / m2. Technical parameters: The product meets the requirements of European Directive 89/686, in particular as regards cutting, harmlessness and comfort, as well as the requirements of these standards: DIRECTIVE 89/686 / EEC PPE EN420: 2003 General requirements and test methods 5: grip ability (1 to 5) EN388: 2003 Protective gloves against mechanical risks (palm protection) 3: Abrasion resistance (1 to 4) 1: Blade cutting resistance (1 to 5) 2: Tear resistance (1 to 4) 2: Puncture resistance (1 to 4)