Hydrant system D25 / 30, red (with shape-stable hose 30 m)
62 points to the loyalty system
Hydrant system D25 / 30, red, with dimensionally stable hose 30 m. Certified to EN 671-1. The swivel head of the nozzle allows adjustment of the full and shower flow. More
Hydrant system D25 / 30, red, with dimensionally stable hose 30 m. Certified to EN 671-1. The swivel head of the nozzle allows adjustment of the full and shower flow. More
Fire hydrant systems with dimensionally stable hose are designed for fire protection of buildings. An immediately available effective extinguishing agents with a constant water supply. They are made to be installed into a wall or to be hung on a wall. The requirements for these systems are such that they are readily operable by one person.
Hydrant system components:
Steel cabinet and door
Hose reel (drum)
Dimensionally stable hose DN25 / 30 m - PVC with polyester rubber
Flow valve G 1 "with connection hose
Lockable nozzle Ø 8 mm
Sticker hose reel
Instructions for Use
Certified according to EN 671-1
Installation of the hydrant system
- can be installed on a wall or built into a wall
- water supply must be provided to install the system
- the cabinet is installed at a height of 1.1 m - 1.3 m above the floor (measured from the center of the winch)
- The cabinet must be easy and free to access and the door must open 180 °
- Both sides are provided with water inlet openings, unused openings are blinded
- the minimum overpressure of the hydrant system is specified in ČSN 73 0873 and is 0,2 MPa
Technical description Material: steel plate th. 1 mm
Dimensions: 700 x 700 x 260 mm
Flow rate (at 2bar): 39 l / min
Standard design (surface treatment):
red (RAL 3000)
white (RAL 9010)