Men's reflective Jacket Derby

Purpose of use: The jacket is worn as outerwear - It is a high visibility garment and must not be covered by other clothing or aids. The jacket provides good visibility for the user in dangerous situations. During the day under any lighting conditions and in the dark, when illuminating the vehicle. Anyone who is exposed to these situations should use these garments. In this case, the garment may significantly reduce the risk of an accident. The upper material of the jacket has water resistance properties. The seams are not taped. The choice of the correct high-visibility warning garment, according to the relevant class must be made according to the specific needs of the workplace, the type of risk and the specific conditions at the workplace. The employer is responsible for this choice, is required to determine and choose the right type of clothing before using it. Usage areas: work on the road, track maintenance, rendering, ambulatory and ambulance services, transport, postal services, security agencies, manipulation work on transport areas, etc. Usage Restriction: To provide the correct level of protection as outlined above, the garment worn all the time must be on. The clothing must not come into contact with liquid chemicals, especially solvents and fire. It is also necessary to avoid excessive mechanical damage, in particular retroreflective parts (ripping, tearing off, etc.). Warning: - Visually inspect the clothing before each use. This garment must be kept clean to keep it functioning. Replace immediately if contaminated or faded. - When the integrity of the garment is damaged (breakage, abrasion, excessive thinning of the material, seams, etc.). - Repair only with materials and substances that meet the requirements of the relevant standard. - The protection class is determined by the area of ​​visible material and therefore, the surface marking of these garments is limited. - If the product is used or treated differently from the above, it may be discarded or changed. - The stated maximum number of cleaning cycles is not the only factor related to the life of the garment. durability depends on usage, storage, etc. - Hearing sharpness and peripheral vision may be impaired when wearing a hood. - No warning clothing can guarantee absolute visibility in every situation. Consistent compliance with the intended use does not result in risks that could jeopardize the user's health.
Technical description
Material composition: Outer material: 100% polyester, 350 g / m2 Lining: 100% polyester Water resistance: 8000 mm Vapor permeability: 3000 g / m2 / 24h. Description: Reflective softshell jacket with reflective stripes, water and wind resistant, zip fastened, detachable hood, sleeve ends with adjustable cuff, pull down at the bottom of the jacket, TPU membrane, 3 outer zip pockets. Recommended use: construction, travelers, drivers, logistics, maintenance, rescuers. These garments meet the basic hygiene and safety requirements of Directive 89/686 / EEC and other standards. Category II Personal Protective Equipment. Government Regulation 21/2003 Coll., Which lays down technical requirements for personal protective equipment. EN ISO 13688: 2013 (EN ISO 13688: 2013) STN EN ISO 20471: 2013 / A1: 2017 / EN1: 2015 (EN ISO 20471: 2013 / A1: 2016) Examples of activities are e.g. work on the road, track maintenance, rendering, ambulatory and ambulance services, transport, postal services, security agencies, manipulation work on transport areas, etc.