Goatskin gloves - full grain leather. Back - cotton elastic interlock knit. American cut.
Leather: goatskin - thickness 0.70 to 0.90 mm.
Back: 100% blue Jersey cotton.
Color: natural-blue
Size:
CT402 - 07, 08, 09, 10, 11
DPCT402-10
MANUAL:
Mechanical hazard gloves for general use in dry environments without the risk of chemical, microbiological, electrical, or thermal hazards.
USE RESTRICTIONS:
Do not use gloves beyond their use as defined in the instructions below. The user is reminded that the gloves have a very high tensile strength (level 3.4) and must not be used if there is a risk of being caught by the machine in motion. These gloves do not contain substances that are cancerous or toxic. For sensitive persons, contact with skin may cause allergic reactions (natural latex, cuffs on some gloves at the edge), in which case discontinue use of the gloves and consult with your doctor. Before using these gloves, check for damage. Replace them if necessary.
Storage Instructions:
Store the gloves in a cool, dry, frost-free, and light-protected place in their original packaging.
CLEANING AND MAINTENANCE INSTRUCTIONS:
No special maintenance is recommended for this type of glove.
TECHNICAL PARAMETERS:
The product meets the requirements of European Directive 89/686, in particular as regards cutting, harmlessness and comfort, as well as the requirements of these standards:
DIRECTIVE 89/686 / EEC PPE
EN420: 2003 General requirements and test methods
5: grip ability (1 to 5)
EN388: 2003 Protective gloves against mechanical risks (palm protection)
2: Abrasion resistance (1 to 4)
1: Blade cutting resistance (1 to 5)
1: Tear resistance (1 to 4)
1: Puncture resistance (1 to 4)
Technical description Goatskin gloves - full grain leather. Back - cotton elastic interlock knit. American cut.
Leather: goatskin - thickness 0.70 to 0.90 mm.
Back: 100% blue Jersey cotton.
Color: natural-blue
Size:
CT402 - 07, 08, 09, 10, 11
DPCT402-10
TECHNICAL PARAMETERS:
The product meets the requirements of European Directive 89/686, in particular as regards cutting, harmlessness and comfort, as well as the requirements of these standards:
DIRECTIVE 89/686 / EEC PPE
EN420: 2003 General requirements and test methods
5: grip ability (1 to 5)
EN388: 2003 Protective gloves against mechanical risks (palm protection)
2: Abrasion resistance (1 to 4)
1: Blade cutting resistance (1 to 5)
1: Tear resistance (1 to 4)
1: Puncture resistance (1 to 4)
