Safety work helmet BASEBALL DIAMOND

WORK HELMET IN THE SHAPE OF A BASEBALL CAP Safety helmet with ABS ventilation. Improved "baseball cap" shape to improve vertical vision. Tested for wearing on both sides. Polyamide inner padding: 3 textile straps with 8 point attachment. Foam sweatband. Innovative “colour to colour” button adjustment for 53 to 63 cm head size. Two possible strap positions (upper / lower) for added comfort. Electrical insulation up to 1000 V AC or 1500 V DC. Can be used at temperatures up to -30 ° C. It meets the requirements of EN397: 2012, valid for production series 03/2016 and later. Colour: Yellow, (red, white, blue on order) Size: adjustable Weight: 425 g Advantages: Download button for easy size adjustment Fluorescent inks and silver ribbon for high visibility Also tested for wearing backwards Rounded peak for better vertical view Activities: construction / construction works, heavy industry, petrochemical industry Risks: heat, shocks, electric current EN397: 2012 + A1: 2012 Industrial Safety Helmets MM Splash of molten metal LD Transverse deformations -30 ° C + 50 ° C Very low temperatures 440VAC Electrical insulation properties MANDATORY REQUIREMENTS - Impact *: The force transmitted to the headform during the fall of a 5 kg item from a height of 1 m shall not exceed 5 kN. The kinetic energy on the helmet reached 49 J after the test. - Penetration of sharp objects *: The spike of the weight used in the test (3 kg from a height of 1 m) must not come into contact with the skull. - Fire resistance: The helmet must not burn and emit more than 5s of flame after the flame has been removed. * Tests of mechanical resistance against falling sharp object impact are performed at ambient temperatures of + 50 ° C and -10 ° C. OPTIONAL REQUIREMENTS - Extreme temperatures: Tests of mechanical resistance against falling sharp object impact are performed at ambient temperatures of +150 ° C, -20 ° C, or -30 ° C. - Protection against lateral deformation. The maximum helmet deflection must not exceed 40 mm. - Protection against accidental short-term contact with live electrical wires, which can reach 440 V (AC). - Spray resistance to molten metal. EN50365: 2002 Electrically insulating helmets for use in low voltage installations CLASS 0 MANDATORY REQUIREMENTS Helmets with electrically insulating properties for use on or near electrical equipment with a voltage below 1000 V at AC or 1500 V at DC (electrical class 0). When used in conjunction with other electrical insulating devices, these helmets prevent the operator's head from being hit by a dangerous electric current. These optional electroinsulating properties are more demanding than EN397 tests and serve as a supplement. (Marking with two triangles, class 0)
Technical description
Safety helmet with ABS ventilation. Improved "baseball cap" shape to improve vertical vision. Tested for wearing on both sides. Polyamide inner padding: 3 textile straps with 8 point attachment. Foam sweatband. Innovative “colour to colour” button adjustment for 53 to 63 cm head size. Two possible strap positions (upper / lower) for added comfort. Electrical insulation up to 1000 V AC or 1500 V DC. Can be used at temperatures up to -30 ° C. It meets the requirements of EN397: 2012, valid for production series 03/2016 and later. Colour: Yellow, (red, white, blue on order) SIZE: ADJUSTABLE WEIGHT: 425 g ADVANTAGES: Download button for easy size adjustment Fluorescent inks and silver ribbon for high visibility Also tested for wearing backwards Rounded peak for better vertical view Usafe areas: construction / construction works, heavy industry, petrochemical industry Risks: heat, shocks, electric current EN397: 2012 + A1: 2012 Industrial Safety Helmets MM Splash of molten metal LD Transverse deformations -30 ° C + 50 ° C Very low temperatures 440VAC Electrical insulation properties MANDATORY REQUIREMENTS - Impact *: The force transmitted to the headform during the fall of a 5 kg item from a height of 1 m shall not exceed 5 kN. The kinetic energy on the helmet reached 49 J after the test. - Penetration of sharp objects *: The spike of the weight used in the test (3 kg from a height of 1 m) must not come into contact with the skull. - Fire resistance: The helmet must not burn and emit more than 5s of flame after the flame has been removed. * Tests of mechanical resistance against falling sharp object impact are performed at ambient temperatures of + 50 ° C and -10 ° C. OPTIONAL REQUIREMENTS - Extreme temperatures: Tests of mechanical resistance against falling sharp object impact are performed at ambient temperatures of +150 ° C, -20 ° C, or -30 ° C. - Protection against lateral deformation. The maximum helmet deflection must not exceed 40 mm. - Protection against accidental short-term contact with live electrical wires, which can reach 440 V (AC). - Spray resistance to molten metal. EN50365: 2002 Electrically insulating helmets for use in low voltage installations CLASS 0 MANDATORY REQUIREMENTS Helmets with electrically insulating properties for use on or near electrical equipment with a voltage below 1000 V at AC or 1500 V at DC (electrical class 0). When used in conjunction with other electrical insulating devices, these helmets prevent the operator's head from being hit by a dangerous electric current. These optional electroinsulating properties are more demanding than EN397 tests and serve as a supplement. (Marking with two triangles, class 0)